Basicrtrconfigfinal.pkt: This Packet Tracer file contains the lab fully configured to meet the tasks. The tasks for this lab are as follows: Configure the hostname of R1 as “RTR1” and R2 as “RTR2”. Also set the clocks on the devices to the current date and time. Configure the link between R1 and R2 to be on the network 192.168.12.0/24.
Download the latest version CISCO Packet Tracer 7.1 without login and enjoy the network simulation like it is real. And since CISCO has improved his software so now you don’t need to login again and again.
Packet Tracer is a powerful network simulation platform inspiring students to experiment with network behavior and ask 'what if' questions. In this topology, 2 Cisco Catalyst 2950-24 switches and 6 PCs are used. You can DOWNLOAD the Cisco Packet Tracer example with.pkt format at the end of.

Prepare the CCNA and CCNP exams with our Cisco Packet Tracer tutorials. Download free Packet Tracer 6.2 & 7.1 labs to get trained for simulation questions using this Cisco Networking Academy simulation software. Download CCNP TSHOOT exam topology for Cisco Packet Tracer and practice troubleshooting scenarios on the real exam network. Troubleshoot and Resolve Network Issues.pka. (49k) dylan vensel.

17.8.1 Packet Tracer – Design and Build a Small Network – Physical Mode Answers

Packet Tracer – Design and Build a Small Network – Physical Mode(Answers Version)

Answers Note: Red font color or gray highlights indicate text that appears in the Answers copy only.

Explain how a small network of directly connected segments is created, configured, and verified.

In this Packet Tracer Physical Mode (PTPM) activity, you will design and build a network from scratch.Your design must include a minimum of one Cisco4321 router, two Cisco 2960 switches, and two PCs.Fully configure the network and use IPv4 or IPv6 (subnetting must be included as a part of your addressing scheme).Verify the network using at least five show commands.Secure the network using SSH, secure passwords, and console passwords (minimum).

What was the most difficult portion of this activity?

Type you answers here.

Answers will vary.

Why do you think network documentation is so important to this activity and in the real world?

Type you answers here.

Documentation is imperative to good network management.Without it, network administrators have to recreate topologies, physically check addressing, etc. This takes time, which could be used elsewhere.

Create a small network of directly connected segments, at a minimum 1 router, 2 switches and 2 PCs, and include a screenshot of the network in your final documentation.

Sample Topology:

Configure the network to include switches, routers, and end devices and use your own network addressing.You must use subnetting of some type and you can use either IPv4 or IPv6 logical addressing. Create a table showing your physical addressing scheme for the router, switch, and PC and include it in your final documentation.

Device Name	IP Address	Subnet Mask
Cap_rtr	G0/0/0 – 192.168.1.1 G0/0/1 – 192.168.1.33	255.255.255.224 255.255.255.224
Cap_sw1	VLAN1 – 192.168.1.20	255.255.255.224
Cap_sw2	VLAN1 – 192.168.1.62	255.255.255.224
Cap_PC1	F0 – 192.168.1.10	255.255.255.224
Cap_PC2	F0 – 192.168.1 40	255.255.255.224

Blank Line – no additional information

Verify the network by using show commands (at least 5) to provide a performance baseline. Be able to discuss why you chose the show commands you selected and what the output means (use all Packet Tracer activities for modules 1-17). Keep screenshots of your output and include in your final documentation.

Cap_rtr# show arp

ProtocolAddressAge (min)Hardware AddrTypeInterface

Internet192.168.1.1–00D0.9741.9101ARPAGigabitEthernet0/0/0

Internet192.168.1.101000A.4120.9039ARPAGigabitEthernet0/0/0

Internet192.168.1.33–00D0.9741.9102ARPAGigabitEthernet0/0/1

Internet192.168.1.40100D0.BCC3.BBEBARPAGigabitEthernet0/0/1

Internet192.168.1.6200060.4779.5A11ARPAGigabitEthernet0/0/1

Cap_rtr# show int g0/0/0

GigabitEthernet0/0/0 is up, line protocol is up (connected)

Hardware is Lance, address is 00d0.9741.9101 (bia 00d0.9741.9101)

Internet address is 192.168.1.1/27

MTU 1500 bytes, BW 1000000 Kbit, DLY 100 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Full-duplex, 100Mb/s, media type is RJ45

ARP type: ARPA, ARP Timeout 04:00:00,

Last input 00:00:08, output 00:00:05, output hang never

Last clearing of “show interface” counters never

Input queue: 0/75/0 (size/max/drops); Total output drops: 0

Queueing strategy: fifo

Output queue :0/40 (size/max)

5 minute input rate 27 bits/sec, 0 packets/sec

5 minute output rate 23 bits/sec, 0 packets/sec

8 packets input, 1024 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

0 input packets with dribble condition detected

7 packets output, 896 bytes, 0 underruns

0 output errors, 0 collisions, 1 interface resets

0 babbles, 0 late collision, 0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output buffers swapped out

Cap_rtr# show ip route

Codes: L – local, C – connected, S – static, R – RIP, M – mobile, B – BGP

D – EIGRP, EX – EIGRP external, O – OSPF, IA – OSPF inter area

N1 – OSPF NSSA external type 1, N2 – OSPF NSSA external type 2

E1 – OSPF external type 1, E2 – OSPF external type 2, E – EGP

i – IS-IS, L1 – IS-IS level-1, L2 – IS-IS level-2, ia – IS-IS inter area

* – candidate default, U – per-user static route, o – ODR

P – periodic downloaded static route

Savehollywood catalina. Gateway of last resort is not set

192.168.1.0/24 is variably subnetted, 4 subnets, 2 masks

The As

Cisco Packet Tracer Sample Network Download